• Serial digital video receiver for standard and high definition component video:
• SD 525i and 625i
- HD 720p 24, 25, 30, 50 and 60
- HD 1080i 50, 60
- HD 1080p 24, 25, 30, 50 and 60
• Supports 8-bit, 10-bit or 12-bit component digital video:
- RGB or YCbCr 4:4:4 sampled
- YCbCr 4:2:2 or 4:2:0 sampled
• Integrated cable equalizer for long reach cable performance
- 230m typical HD performance over high-quality 75Ω coaxial cable (Belden 1694A or equivalent)
- 160m typical HD performance over RG59 or equivalent 75Ω coaxial cable
• Serial digital loop-though output
• Integrated audio de-embedder for the extraction of up to 8 channels of 48kHz digital audio
• Supports IEC 13818-1 compliant transport streams over the Asynchronous Serial Interface (ASI)
• Automatic selection between SD/HD component video and ASI input data
• Ancillary (ANC) data detection and extraction
• User selectable processing features, including:
- Timing Reference Signal (TRS) error detection and correction
- ANC data checksum error detection and correction
- Programmable ANC data detection
- Line number and CRC error detection and correction
- Illegal video code word re-mapping
• 4-wire Gennum Serial Peripheral Interface (GSPI) for external host command and control
• JTAG test interface
• 1.2V core and 3.3V analog voltage power supplies
• 1.8V or 3.3V selectable digital I/O power supply
• Small footprint 100-BGA (11mm x 11mm)
• Low power operation, typically 570mW at HD
• Pb-free and RoHS compliant